Before you order

A good fit starts here.

Take a few careful measurements for each cushion. Keep your notes nearby as you choose your covers and foam.

Your tape measure checklist

Three measurements.
Every cushion.

Measure in inches and write down the exact dimensions for each piece, even when two cushions look the same size.

  1. 01

    Width

    Measure across the cushion from one side to the other. Keep your tape straight and avoid compressing the foam.

  2. 02

    Depth

    Measure from the front edge to the back edge. For a backrest, note the height of the piece as its depth.

  3. 03

    Thickness

    Measure from the bottom face to the top face at the edge. Order foam in the same thickness as your cushion cover.

Make a note for each piece.

For example: seat cushion, 36 inches wide × 22 inches deep × 4 inches thick, quantity 2. List backrests separately from seats.

Keeping your existing foam? Measure the foam itself with the cover removed. Replacing worn or compressed foam? Check the space it needs to fit and contact us if you are unsure.

Measuring a curved cushion.

Curved shapes

Include the overall width and thickness, plus the depth at both sides and at the middle. Add a depth measurement halfway between each side and the middle, and mark where each measurement was taken.

Radius curves

For a radius curve, include the overall width and thickness, plus the depth at both sides and at the middle.

Send a labeled sketch or photo with your measurements in inches. For curves, angles or cutouts, request a custom quote before ordering so we can confirm the details of your fit.

Get measuring help →

Ready for your refresh?

Bring your measurements.
Find your comfort.

Shop Custom Cushions →